Skip to main content
San Bernardino Railroad Historical Society
P.O. Box 2878
San Bernardino, CA 92406-2878

COMPARISON

Santa Fe 3751

COMPARISON

COMPARISON OF REMAINING NORTHERNS (4-8-4)

Welcome to the 4-8-4 comparison page, where you can compare general specifications of currently operable 4-8-4’s – as well as some 4-8-4’s that are not operable (being restored, undergoing new FRA recertification or waiting to be bought) but have a large following. With the publication of information about the importing of a couple Chinese 2-10-2’s into the United States we thought that this would be a good opportunity to compare these examples of the last big dual purpose steam locomotives that operated regularly in China to their American cousins. The chart is arranged from the lightest engines to the heaviest – following the Chinese locomotive.

The data on this chart is a compilation of information from Steamlocomotive.com. Or in some cases from the individual organizations stated online specs.

Road / Engine No. Current Status Year Built / Builder Class Drivers in Inches Engine Weight Engine & Tender Weight Tractive Effort Cylinders Boiler Pressure Length
QJ 7081* Pulled last regularly scheduled mainline steam train in China. Currently used for special operations on the Iowa Interstate Railroad Limited. Late 1980's QJ 1500mm (59 inches) N/A 220 Tons with 8 wheel tender / 253 Tons with 12 wheel tender 282kn 650mm diameter (25.59 inches) x 800mm stroke (31.49 inches) 14.7 bar (213 lbs) 26.0 meters for 8 wheeled tender (85.3 ft) / 29.2 meters for 12 wheeled tenders (95.8 ft)
GTW 6325 Stored near Sugercreek, Ohio waiting to be moved into the Age of Steam Roundhouse following completion of its construction. 1942-43/ Alco U-3-B 73 inches 403,000 lbs (Lightest) 673,500 lbs 59,000 lbs (Least) 26 inches x 30 inches (Smallest) 250 lbs 96 feet (Shortest)
Cotton Belt 819 Stored at Arkansas Railroad Museum, needs FRA recertification 1943 / Cotton Belt L-1 70 inches (Smallest) 419,800 lbs 737,500 lbs 61,564 lbs 26 inches x 30 inches (Smallest) 250 lbs 99 feet 8.5 inches
Reading 2100 Stored serviceable on a siding in Richland, Washington (Reading Railroad Online). 1947 / Reading T-1 70 inches (Smallest) 447,300 lbs 844,000 lbs 68,000 lbs (79,100 lbs with booster) 27 inches x 32 inches 240 lbs 110 feet 6 inches
Milwaukee Road 261 Undergoing FRA recertification at Minneapolis Junction by Friends of the 261 1943 / Alco S-3 74 inches 460,000 lbs 824,100 lbs 62,040 lbs 26 inches x 32 inches 250 lbs 109 feet 8 inches (with coupler extended)
SP 4449 Operational. Based out of Portland, Oregon. Maintained by the Friends of SP4449 1941 / Lima GS-4 80 inches (Largest) 475,000 lbs 865,750 lbs 64,800 lbs (unknown with booster assistance) 25.5 inches x 32 inches 300 lbs (Highest) 101 feet 5 inches
ATSF 3751 Operational. Based out of Amtrak's Los Angeles Locomotive Facility. Full list of current specs. 1927 / Baldwin (Oldest) 3751 80 inches (Largest) 478,100 lbs 874,346 lbs 66,000 lbs
(as built)

71,719lbs**
(after 1941 rebuild)
30 inches x 30 inches 230 lbs (Lowest) 108 feet 7 inches
C&O 614 Remains for sale. Stored at Reading & Northern Engine Facility in Port Clinton, PA. (Chesapeake & Ohio 614) 1948 / Lima J-3A 72 inches 482,200 lbs 865,530 lbs 68,300 lbs (80,700 lbs*** with booster) 27.5 inches x 30 inches 255 lbs 112 feet
SP&S 700 Operational. Based out of Portland, Oregon. Maintained by the Pacific Railroad Preservation Association 1938 / Baldwin E-1 77 inches 485,500 lbs 871,550 lbs 69,500 lbs 26 inches x 31 inches 260 lbs 110 feet 7 inches
UP 844 Operational. Owned by Union Pacific Railroad and based out of Cheyenne, Wyoming. Maintained by the Union Pacific Steam Program 1944 / Alco FEF-3 80 inches (Largest) 486,340 lbs 907,890 lbs 63,800 lbs 25 inches x 32 inches 300 lbs (Highest) 114 feet 3 inches
N&W 611 Stored at the Virginia Museum Of Transportation in Roanoke, VA. for display only 1950 / N&W Roanoke (Youngest) J 70 inches (Smallest) 494,000 lbs 873,000 lbs 80,000 lbs 27 inches x 32 inches 300 lbs (Highest) 109 feet 2 inches
ATSF 2926 Operational. Last operated June 2024 for a triumphant return to the Albuquerque Railyard. Based in Albuquerque, New Mexico. Maintained by by NMSL&RHS 1944 / Baldwin 2900 80 inches (Largest) 510,150 lbs (Heaviest) 961,000 lbs (Heaviest) 86,922 lbs** (Strongest) 28 inches x 32 inches (Largest) 300 lbs (Highest) 120 feet 10 inches (Longest)

* Figures for this locomotive are preliminary and have been converted from Metric to American Standards, these figures have also not been confirmed. While comparing this data it is relevant to know that these are not state of the art steam locomotives of the 1970’s or 80’s – they are more closely likened to state of the art 1930’s. Remember the Chinese built these as copies to Russian 2-10-2’s, who built their engines as copies of American 2-10-2’s from the 1930’s. While most of these engines have redundant systems they have sometimes been under engineered with small axles, small rods and bearings. In addition the ride is very rough as the drivers are not cross balanced and the engines tend to hunt and bounce on strait track. The last QJ built was number 7207 on December 21, 1988 – thus ending the production of 150 to 250 QJ’s per year. More information will be available soon. With the advent of American Operators importing these engines into the US for use on tourist roads we thought it would be interesting to include specs on these engines.

** There are several different published numbers available for the 2900’s, and perhaps it is best if we let Bob Kittel (SBRHS CMO) address this oddity – “It is interesting that the Santa Fe 4-8-4s, all four classes, have the same stated tractive effort of 66,000 lbs. The computed tractive effort is based upon a coefficient (0.85). This coefficient is the combination of Mean Effective Pressure and a friction term. The friction term is set to ‘1.0’ when roller bearings are specified, which it has now. If you do the math work on figuring tractive effort for the 51 class then you come up with 71,719 lbs of tractive effort (TE). This of course after using a different coefficient of friction calculation because of the roller bearings – 66k was the TE as built with friction bearings in 1927, in 1941 it was modernized with roller bearings. The RRs didn’t use the different methods of figuring and only used .085 for friction bearings for all engines. If you look at the tractive effort of a 2900 as 66K (as stated in some books) this is ridiculous, 2900’s weigh 32,000 pounds more than the 51 class and has higher steam pressure and more horsepower. The tractive effort figure then for 2900s comes to around 86,922 TE. This is why I said that 66K TE for 2900s is crazy.”

*** Originally built for C&O with booster, however Ross Rowland removed the booster from his Reading 2100 for use on the 614 and never installed it. The result was that both the Reading 2100 and the C&O 614 do not have boosters today.

San Bernardino Railroad Historical Society
P.O. Box 2878
San Bernardino, CA 92406-2878
MENU CLOSE